Buy the Ceilingboard Hanger Online
HOME          FAQs          BUY NOW          STORE GUIDE         BECOME A STOCKIST         CONTACT US
OVERBOARD HANGER TOOL - FOR USE WITH OVER-BOARDING EXISTING CEILINGS
The New Overboard Hanger Tool consists of two plasterboard clamps which quickly attach to the edge of the plasterboard, and two fixing
plates (in the case of over-boarding) which attach to the joists, allowing new plasterboards to be raised and fixed singlehandedly.

The all-new simple way to install new plasterboard to existing ceilings (known as over-boarding) single-handedly. A standard 2400mm x 1200mm x 12.5mm sheet of plasterboard is a bulky and heavy (approx 25kg) item of building materialn used to finish off ceilings. In older buildings it is often easier to over-board an existing ceiling compared to taking down the old plasterboards. This process involves installing new plasterboards to the existing plasterboard, however the task of getting the new plasterboards up and securely fixed to the existing ceiling has always been a labour-intensive two-man job - until now. Introducing the All-New Over-Board Hanger Tool

The installation of plasterboards to existing ceilings can now be completed simply by one person with little or no risk of injury to themselves and in a fraction of the time it takes two operatives. The Over Board Hangers are made in England of high-quality, heavy duty zinc-plated steel for strength and durability. They consist of two plasterboard clamps which quickly attach to the edge of the plasterboard, and two fixing plates (in the case of over-boarding) which attach to the joists. The pair connect and create a hinge that allows you to walk the board up to the existing ceiling and hold in place with a T-Bar.

Price: £44.99 SALE £34.99

Having the Overboard Hanger in your toolbox means:

  • No more struggling with heavy boards
  • No more lifting and balancing large heavy plasterboards
  • Reduce your chances of injury and long term suffering
  • These clamps locate the plasterboards exactly ready for the next board

DETAILED INFORMATION, BENEFITS, AND SPECIFICATION

  • These revolutionary new plasterboard tools offer a number of significant benefits when undertaking the extremely difficult task of lifting large heavy sheets of plaster boards up to ceiling joists and existing ceilings.
  • Our new Ceiling Over-Board Plate Hanger tool sets have been added to our range to enable one person to raise full sized 2400mm x 1200mm x 12.5mm plasterboard sheets weighing 25Kg up to existing ceilings and for double-boarding in integral garages to help meet fire regulations requirements. They work in a similar manner to our Original Ceiling Board Hangers, however these are screw-fixed over existing boards after locating the existing timber joists. They then use the same principle to raise the board up to the ceiling joists.
  • This method saves double-labour costs and at the same time helps to reduce the risk of injury to back, neck, shoulders and arms.
  • The Ceiling Over Board Plate Hanger sets are compact and portable and are suitable for all timber joist widths.
  • This new tool is specifically designed to overboard an existing ceiling which has suitable timber joists which are not on show, without all the mess involved in removing the old ceiling. The Ceiling Over-Board Hanger sets are compact and portable and can easily fit in pockets or be belt hung.
  • Each set comprises of two board clamps which quickly attach to the edge of the plaster board and two fixing plates (in the case of over-boarding) which also fix to the joists.
  • When attached, simply bring the board up and along until the clamps and hooks align and clip together. The plasterboard can then be gently pushed (hinged) upwards by hand and held in place with a ready-made “T” bar. It is then automatically square with the joists and in position ready for screwing firmly in place.
  • No heavy lifting has been required.
  • The plasterboard sheets can now be fitted in minutes and the “QUICK CLAMP, HINGE AND PUSH” method can be used to complete the whole ceiling. Small board areas have never presented a problem when finishing off and the clamps are not needed in this instance.
  • The clamps are quality made in England of heavy duty zinc-electroplated steel and are strong and durable for building site works and DIY enthusiasts alike. No plastic is used in any of our tools in this heavy board-lifting operation, just heavy-duty steel for strength and durability. The all-new must have tool for everyone contemplating this type of work. Buy yours now from the Ceiling Board Hanger Company and start saving time money and your future health right away.

Customer Comments - Overboard Hanger

Six more great reasons you should buy the Overboard Hanger -

1. You now only need one person to install plasterboards to ceilings when traditionally it has always been a two person job. The second operative can now be more productive doing another job. Also, they are ideal for small and one man building operations and DIY fans alike.

2. The Overboard Hangers are made in England, helping to support our own industries.

3. The tools are made from heavy quality zinc-plated steel, meaning they are more hardwearing, built to last and take the abuse of the construction industry.

4. Large expensive jacking tables are no longer required, meaning you save on space, time and costs.

5. The Overboard Hanger tool is a low cost tax deductable item.

6. Any initial costs are soon repaid, increasing your profit margins.

Compare Banking - Accounts - Savings Ceiling Plasterboard   How to Hang Plasterboard   Ceilingboard   Buy Plasterboard Tools   Hanging Plasterboard   Plasterboard Ceiling Tools UK